Equalization Phases and Preset Selection: Review Checklist

Review checklist

Review Checklist for Equalization Phases and Preset Selection focuses on EQ phase retry count, preset convergence time, and post-EQ BER. The purpose is to turn memory observations into mechanism-backed actions with explicit owners and release-safe validation.

• Workload scope and SLA targets are explicit.

• Environment tags are locked and reproducible.

• First failing transition is proven by command-level evidence.

• Owner and rollback criteria are documented.

• Validation matrix covers performance, stability, and reliability.

• Owners signed: PHY owner, SI/PI owner, bring-up engineer, validation owner.

PCIe/CXL deep dive

LTSSM and equalization determine whether high-speed links are stable under corner traffic and retimer paths.

Concept diagram

LTSSM + EQ

Detect -> Polling -> Config -> L0 <-> Recovery

Metric graph

LINK INSTABILITY SOURCES

EQ margin           ██████
retimer FW          ████
SI/cable plant      ███

Reports and artifacts

• LTSSM state log

• EQ coefficient dump

• negotiated speed/width snapshot

• recovery trigger timeline

Mini case study

Gen5 passed cold boot EQ but entered Recovery loops under DMA heat after retimer firmware update.

Debug branches

• Capture ordered sets at failure boundary

• Compare EQ presets across temperature corners

• Bypass retimer to isolate segment faults

Senior review question

Ask: which latency, bandwidth, and reliability evidence proves this PCIe/CXL topic is closed under real traffic?

Key takeaways

• Always tie controller and PHY counter shifts to application latency and throughput outcomes.

• Lock firmware timing profile, thermal condition, and DIMM state before comparing PCIe/CXL captures.

Common pitfalls

• Chasing peak bandwidth while ignoring p99 latency and fairness tails.

• Changing timing guardbands without separating SI noise from scheduling issues.

• Declaring closure without reliability gates, fault injection, and regression replay.

Review checklist explanation

A checklist here protects against false closure. Every item should map to a known memory failure mode.

For Equalization Phases and Preset Selection, minimum checklist: workload scope, EQ phase retry count, preset convergence time, and post-EQ BER, artifact evidence (EQ coefficient log, preset matrix, and margin sweep report), bottleneck class, owner, rollback path, and corner-matrix validation.

If controller or firmware changed, include fairness and RAS checks. If PHY or package assumptions changed, include SI/PI and thermal guardband evidence.