Advanced Error Reporting (AER): Inputs and Outputs

Inputs and outputs contract

Inputs and Outputs for Advanced Error Reporting (AER) focuses on Correctable error rate, uncorrectable error escalation time, and AER mask effectiveness. The purpose is to turn memory observations into mechanism-backed actions with explicit owners and release-safe validation.

Use this contract for architecture, controller firmware, PHY, and validation handoffs. Missing inputs create expensive late-stage rework and inconclusive debug loops.

INPUTS
  - workload distribution and QoS target
  - firmware revision, controller policy profile, timing registers
  - data-rate / voltage / temperature operating state
  - training snapshot and reliability policy status

OUTPUTS
  - bottleneck classification with command-level evidence
  - owner-signed mitigation proposal
  - before/after trend for latency, bandwidth, and reliability
  - regression matrix with rollback triggers

Ownership split

OWNERSHIP LAYERS - Advanced Error Reporting (AER)

layer              owner
-----------------  ----------------
protocol/RTL       reliability owner
PHY/SI             PHY + SI/PI owner
firmware/OS        FW + driver owner
validation         compliance + post-silicon

PCIe/CXL deep dive

RAS closure maps AER, poison, and surprise-down events to bounded containment and recovery actions.

Concept diagram

RAS ESCALATION

detect -> classify -> contain -> recover -> validate

Metric graph

RAS EVENT MIX

correctable trend   ███████
uncorrectable       ██
surprise-down       █

Reports and artifacts

• AER register dump

• poison injection log

• surprise-down timeline

• containment action record

Mini case study

Masked correctable errors accumulated until a surprise-down during peak traffic forced unplanned failover.

Debug branches

• Separate CE trend from UE containment paths

• Validate poison handling end-to-end

• Test surprise-down drain and driver recovery

Senior review question

Ask: which latency, bandwidth, and reliability evidence proves this PCIe/CXL topic is closed under real traffic?

Key takeaways

• Always tie controller and PHY counter shifts to application latency and throughput outcomes.

• Lock firmware timing profile, thermal condition, and DIMM state before comparing PCIe/CXL captures.

Common pitfalls

• Chasing peak bandwidth while ignoring p99 latency and fairness tails.

• Changing timing guardbands without separating SI noise from scheduling issues.

• Declaring closure without reliability gates, fault injection, and regression replay.

Handoff explanation

Inputs extend beyond timing registers. PCIe/CXL analysis inputs include traffic distribution, address map, queue policy, training state, SI/PI condition, thermal state, and firmware version.

Outputs must be action-ready: Correctable error rate, uncorrectable error escalation time, and AER mask effectiveness, artifact packet (AER register dump, error source tree, and escalation timeline), bottleneck class, owner, expected gain, and rollback scope. "Bandwidth improved" without this packet is not signoff-ready.

The safest handoff is a before/after evidence set: environment tags, traces, hypothesis, chosen fix, rejected alternatives, and regression criteria.